Skip to main content

Recoveron Industrial

Safety Striping and Floor Marking

Safety striping that defines walkways, marks work areas and flags hazards in plants and warehouses, improving visibility and reducing accidents.

Throughout the Continental U.S.

Safety Striping for Plants and Warehouses

Striping defines walkways and aisles, designates areas for specific activities and marks the hazards people walk past every day, such as low overhead areas and sharp corners. It is one of the cheapest safety improvements a facility can make and one of the first things an inspector notices.

We use high-visibility colors, comply with OSHA standards and local regulations, and lay the plan out with the people who actually move through the space.

Safety Striping painting services

Striping Services

Safety Striping painting installation

Floor marking

Walkways, aisles and designated areas: forklift parking, material storage and space around equipment that needs room to be maintained.

Yellow safety striping marking a walkway on an industrial plant floor

Aisle and traffic marking

Safe walking routes and traffic flow through the building, which is what prevents collisions, slips and falls where people and trucks share space.

Hazard marking

Heavy machinery, exposed electrical wiring and anything else people need warning about, with the symbols that make the warning obvious at a glance.

Emergency exit marking

Exits and emergency equipment such as fire extinguishers, marked so an evacuation is not a guess in the dark.

Line striping

Parking lots, loading docks and other outdoor areas, where visibility does as much for safety as it does inside the building.

Custom striping

Epoxy floor striping, bollard painting, support column painting and walkway painting, laid out for how your facility actually works.

Epoxy floor coatings

Striping That Stays Readable

High-visibility colors

Yellow, orange and red, chosen so markings read at a distance, in poor light and from the seat of a forklift.

OSHA and local regulations

We keep up with the standards and the regulations, so the markings match what an inspector expects to find rather than what looked sensible at the time.

Inspected and kept up

Layouts change. Striping needs reviewing whenever equipment moves, and re-marking before it fades to the point where people stop seeing it.

How a Striping Project Runs

Walk the routes

We walk the building with your team, following how people and trucks actually move rather than how the drawing says they should.

Layout and colors

The plan names the lines, symbols and colors, area by area, so everyone agrees before anything is permanent.

Floor preparation

Paint only holds on a clean, sound floor. Preparation is part of the quote, not a surprise on the day.

Apply and hand back

Markings go down in the window you have given us, then the area is handed back once they have cured enough to take traffic.

What Our Customers Say

"Recoveron was a great choice for the room we needed cleaned. It had diesel soot and oil caked on (walls, ceiling and floor) for over 15 years and their team has it spotless. One of the biggest comments we have received from our employees is that "It doesn't even look like the same room". Their service was timely, very easy to schedule, and customer service was amazing. Would strongly recommend using Recoveron for future projects here and to anyone in need of any of their services."

Trent W.S. Darley Chippewa Falls, WI

"Our 30+-year-old machining company was in dire need of professional cleaning, especially after the installation of 3 new large boring mills and an open house just around the corner! The walls and floor were covered in layers of grease, oil, and coolant. I had several local cleaners in to review and quote the project…. all declined; it was outside of their capability, and they wouldn't touch it.

After calling Recoveron, I could sense they had seen it all before. Their team came out to review and quote the project….. didn't even blink an eye… they could do the job, NO PROBLEM! Plus, they would work during the Off Shift so that we could continue to produce product for our customers. They coordinated the lifts and equipment, and the crew went to work over ten days, meeting with the shop foreman daily to coordinate a plan each night and setting the direction for ease and efficiency for both Recoveron and Lighting Machine. The crew was respectful, detailed, and systematic and took pride in their work; they treated our machine shop as if it were their own home.

The project cost was fair and reasonable, and we intend to engage Recoveron regularly to keep the shop in Tip-Top shape. I have already recommended other companies in our industry to give them a call!
It has been a delight to work with Recoveron; the results are dramatic and far exceeded our expectations!"

Mary Lightning Machine Holland, MI

"We had some heavy dust/oil build-up on our Fresh Air intakes and Exhaust fans at the 30-foot ceiling left. Recoveron came in, blocked off the area, brushed and vacuumed the areas, and cleaned the floors when done.

Their group cleaned and painted a control room exterior and even cleaned and painted a workstation and safety barrier. They look very good.

Part of the group worked on the back wall behind the machinery, brushing and vacuuming it, making it look 100% better.
Thank you very much."

Charles Great Northern Corporation Appleton, WI

“The Recoveron team arrived on time and prepared with all of the required personal protective equipment and food safety requirements in hand. Once onsite their team was extremely self motivated, driven, and required very little oversight from our facility's resources other than general check-ins. Overall we were very impressed with the overhead pipe cleaning service that they provide. I would highly recommend their cleaning crew to any manufacturing facility needing this type of service.”

Kerry Ocean Spray Cranberries Inc. Wisconsin Rapids, WI

"The Recoveron team was very responsive and quick to action. On multiple occasions, I've reached out to them for support and Andy has gotten back to me within hours. I look forward to working with them in the future."

Isabel Plenty Unlimited Inc San Francisco, California

"We have utilized Recoveron for several painting and cleanup projects, with commendable work done each time. All projects, from the initial evaluation/quote to completion, have been successful with little intervention. We look forward to continuing business with Recoveron in the future! Great group of people!"

Jarrod Seneca Foods Corporation Janesville, WI

"Great job!

Good overall experience."

Benjamin Swift Prepared Foods Council Bluffs, IA

"Our building looks so much better and I appreciate all the hard work from your team."

Mike God's Pantry Food Bank Lexington, KY

"Very flexible and easy to work with. Good job cleaning, too!"

Jim Automated Pet Care Products, LLC Auburn Hills, MI

"Overall the experience was great. Weather played a role in the arrival time, but the quality of work and getting it done in a timely fashion was spot-on. Andy Was informative and walked me through the process. Thank you"

Jesse Wagging Tails Pet Resort Eagan, MN

"I have passed on this information to others within Republic Services."

Mark Republic Services Melrose Park, IL
FAQ

Safety Striping: common questions

What is safety striping?

Safety striping is painted or taped lines, symbols and markings on the floors, walls and equipment of an industrial plant, used to indicate safe walkways, hazardous areas and emergency exits.

What kinds of marking does Recoveron do?

Floor marking, aisle and traffic marking, hazard marking, emergency exit marking, line striping for parking lots and loading docks, and custom striping including bollards, support columns and walkways.

What colors are used for safety markings?

High-visibility colors such as yellow, orange and red, so the markings are clearly visible, well maintained and easy to understand.

Does striping have to meet OSHA standards?

Yes, along with local regulations. Recoveron stays current with both, so the markings match what an inspector expects to see.

How often should safety striping be refreshed?

Whenever the layout or the equipment changes, and before the markings fade to the point where people stop noticing them. Regular inspection is part of keeping the facility compliant.

Get a quote for your facility

Keeping your facility clean, painted, and OSHA-ready.

Call Now Get a Quote